kodulehe valmistamine

Monitor Audio kõlarid PL200 II

 

 

It’s unlikely you’ll discover a more persuasive speaker than the PL100 II in its price class, but compare the floor-standing PL200 II with its smaller sibling and immediately you’ll notice the effect of four drivers in a larger cabinet

 

 

2 x 6 1/2" RDT®II long throw bass drivers
4" RDT II mid-range driver,2 x HiVe®II ports
MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II
Bespoke speaker terminals and footings
Recommended Amplifier Requirements (RMS) 100 - 250W
Sensitivity 90dB,Nominal Impedance 4Ω
Frequency Response 35Hz - 100kHz

Värv: must lakk,roosipuu,eben
Mõõdud(LxKxS): 360 x 998 x 375

Monitor Audio kõlarid PL300 II

 

Explore the depths and climb to the heights of your music and film favourites with an effortlessness that confirms an inescapable truth: the bigger the Platinum, the more precious the prize.

 

 

2 x 8" RDT®II long throw bass drivers
4" RDT II mid-range driver,2 x HiVe®II ports
MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II
Recommended Amplifier Requirements (RMS) 100 - 300W
Frequency Response (-6dB - IEC 268-13) 28Hz - 100kHz
Nominal Impedance 4Ω (4.2Ω min. @ 111Hz)

Värv: must lakk,roosipuu,eben
Mõõdud(LxKxS): 410 x 1113 x 470

Monitor Audio kõlarid PL500 II

 

Measured against its peers, there is no finer audio ambassador than the majestic PL500 II. Here you’ll discover the essence of Platinum II engineering: silken layers of the finest high frequency definition suspended on an explicit midrange, seamlessly underpinned by a deep, clean and responsive bass foundation.

 

 

Bespoke speaker terminals and footings
Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
Bolt through drivers: clearer sound and cleaner aesthetics
Anti-Resonance Composite (ARC) mid-range housings and baffle components
Frequency Response (-6dB - IEC 268-13) 22Hz - 100kHz
Recommended Amplifier Requirements (RMS) 150 - 400W
Nominal Impedance 4Ω (4.2Ω min. @ 120Hz)
 

Värv: must lakk,roosipuu,eben
Mõõdud(LxKxS): 504 x 1803 x 626

Monitor Audio kõlarid PL100 II

 

Easy to place in-room the PL100 II will nevertheless belie its compact dimensions with a wide open soundstage punctuated by breath-taking dynamics and imaging so stable you can almost touch it.

 

 

6 1/2" RDT®II bass / mid driver,Single rear HiVe®II port
Recommended Amplifier Requirements (RMS) 60 - 120W
Frequency Response (-6dB - IEC 268-13) 40Hz - 100kHz
Nominal Impedance 6Ω (4.5Ω min. @ 160Hz)
MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II

Värv: must lakk,roosipuu,eben
Mõõdud(LxKxS): 225 x 370 x 285

Monitor Audio subwoofer PLW215 II

 

 

The PLW215 II will help you to re-live the air-bending effect of Mother Nature’s own subwoofer within your listening room

 

Twin 15” C-CAM drivers, triple-suspended for a full 4cm of excursion
A dedicated DSP-controlled amplifier powers each driver
SubConnect software: adjust in-room response using top panel dial or laptop
4 user presets per input, including preset Flat/Music/Movie/Impact modes

Combined 1400W RMS, 2000W Peak (Burst Ratio 1:4 Continuous,)
 

Värv: must lakk,roosipuu,eben
Mõõdud(LxKxS): 504 x 546 x 512

Monitor Audio kõlarid PLC350 II

 

 

This is theatre on a professional scale but with the authentic presence, detail and texture that only very finest high-end audio design can conjure.

 

 

2 x 8" RDT®II long-throw bass drivers,4" RDT II mid-range driver
MPD (Micro Pleated Diaphragm) high frequency transducer designed specifically for Platinum II
2 x HiVe®II ports,New patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
Nominal Impedance 4Ω (4.0Ω min. @ 115Hz)
Recommended Amplifier Requirements (RMS) 100 - 250W
Frequency Response (-6dB - IEC 268-13) 32Hz - 100kHz

Värv: must lakk,roosipuu,eben
Mõõdud(LxKxS): 800 x 288 x 368

Monitor Audio kõlarid PLC150 II

 

Now the soundstage is complete, the drama can begin. Between PL200 IIs or PL100 IIs in a multichannel AV system, the PLC150 II will imbue dialogue with a natural intimacy while pans and effects remain stable and supremely consistent.

 

 

Single rear HiVe®II port
New patented 'DCF' (Dynamic Coupling Filter) mechanism for more natural sound
Underhung, edge-wound voice coils: greater driver efficiency and lifelike dynamics, less distortion
Bolt through drivers: clearer sound and cleaner aesthetics
Frequency Response 45Hz - 100kHz
Recommended Amplifier Requirements (RMS) 60 - 200W
Nominal Impedance 6Ω (4.5Ω min. @ 170Hz)

Värv: must lakk,roosipuu,eben
Mõõdud(LxKxS): 583 x 225 x 291